A smooth, dust free edge adaptable
for presentations not requiring tag molding. All Base and Upper
Shelves as well as End Flats have this option.
The Wire Candy Rack for Gondola/Wall
shelving is used to display small boxes of candy, cookies and other
snack items. Attached brackets allow for easy installation in the
Gondola/Wall Uprights. It may be used on either a Base or Upper
The unit is 24” tall, 8”
deep with three shelves top to bottom 4", 5", and 6", respectively.
It is available in 36” or 48” widths with 1” OC wire spacing.
A Potato Chip Gondola consists of
three major components, a double sided island gondola section, or a
single sided wall gondola section, with a standard shelf that can be
mounted on the gondola in a down slope configuration, and a wire
This is a non-perforated two
position shelf, flat or 40 degree downslope, for use in all products
with standard Madix slotting. There is a 1" lip on the front of the
shelf which is designed for light loading, as expected in one row of
shoes in boxes.
Our Plastic Bottle Slides are an
important component of the Wire Bottle Display Racks. Bottles
slide to the foremost product position whenever a bottle is
removed. The panels are removable from the shelf for easy
E System Sales, Inc. Links
Sales Terms -
Privacy & Copy
Contact Us -
Intended for organizing densely spaced, lightweight
products. It offers a 4" high profile and has a 15 degree
It can be used for small electrical parts, plastic pipe
fittings, trial size items, nuts, bolts, screws, and other
parts. Dividers are ordered separately.
Bracket with hardware included
for hanging Wire Grid Shelves in Gondola/Wall shelving. Sahara
is standard finish.
Rigid, heavy duty for vertically
displaying lengths of plastic or metal pipe, conduit, guttering
or other similar items. Use two shelves per four foot section.
Available for Single Sided Wall Sections
available for inside and outside single sided wall sections in
90 and 45 degree shelves available.
Kit contains four plated
casters, two caster channels, and two “Z” stabilizer bars to create
a mobile Gondola section. Plated Casters replace the Upright and
Base Shoe Levelers. Hardware included.
capacity is 600 lbs. and must be evenly distributed on both sides of
the Gondola. For safety, kit CANNOT be installed on a wall section.
Shelf bracket is one position. All
materials and options available are the same as the Standard Upper
Shelves (SUS). Load capacity of 800 lbs. is based on evenly
distributed static loading. A 1/4" tag molding is integrally formed
into the front edge of shelf.
Shelves can be used for heavy bags of pet for and animal feed,
bottled drinks like Wine, Soda, and Water.
The Mop and Broom Display is composed of
two components which should be ordered together. The Bottom Shelf
component rests on the Base Shelf of a Wall or Gondola section. It
secures to the shelf with wire tabs that insert into the shelf
The Upper Shelf component mounts into
the Standard Uprights. Each unit has five compartments measuring
approx. 9 5/8” wide.
Available in 20", 22", and 24" depths and 4'
The Wire Grid Lawnmower Shelf hangs at a
30 degree downslope in Madix Gondola/Wall sections. It has a 4”
front lip with a 1 1/4” price tag molding attached, offering a full
inch for customer supplied signage.
Since the shelf is Wire Grid, shoppers
may look under the shelf to examine the undercarriage of mowers.
Smaller mowers may fit two per shelf. Larger mowers will only fit
one per shelf. Maximum load capacity of Wire Grid Lawnmower Shelf is
The Madix clothes hang rod assembly
connects to an existing Madix wall or island Gondola shelving system
uprights and is used to hang clothes on a hanger from the tubular
hang rod bar.
Standard carpeted shelf with
variable height lip installed over second row of perforations at
rear. Lip conceals 2" gap that serves as a power and antenna chase
for T.V.'s, VCR's, stereos and other electronic equipment.
Wire shelves for all types of retail
stores can be used for potato chip displays, candy, bread, baked
goods, flowers, potted items, and packaged goods
rack systems add extra storage to any wall or gondola island shelving aisles and
increase the load capability of your existing Gondola Shelving.
E System Sales, Inc. Links
Sales Terms -
Privacy & Copy
Contact Us -
EZ to install
sections for any
wall or gondola
The SBS for Compact Discs
replaces the Standard Base Shelf in Gondola/Wall Sections and offers
the ideal way to display compact discs or similar merchandise.
The metal retainer is designed to
reinforce shelves that have been cut to accommodate structural
support columns. The scrap piece may also be installed for a more
pleasing and finished appearance.
The solution for maintaining
separation of school, office and art supplies. Dividers are 3 3/4"
wide x 7 3/4" high x 6 3/4" deep. The dividers clip into front shelf
perforations. Minimum product width is 6". End dividers are sold
separately and in pairs.
Display hooks to all types of
display shelving or display walls with either pegboard back or a
slatwall type finish
An extremely flexible
merchandising aid. Ideal for displaying long or tall items
vertically in the space at rear of shelf with related small items on
the shelf to promote impulse sales.
Weight capacity is 50% less than a Standard Shelf of same bracket
Smooth pencil polish edges on
top quality glass. Sturdy frame assembly has two position brackets
for flat or 15° down-slope, ideal for gifts, jewelry and optics.
Weight capacity of 40 lb. for Glass Shelf installed on the Glass
Overloading could cause sudden and
catastrophic failure, resulting in possible personal injury.
Jar and Can Shelves
Designed for use with Heavy Duty
10 degree Downslope Shelf sold separately, to display small jars
or cans. Dividing wires are spaced 3 13/16” OC. Tension clips
insert into the shelf perforations at the front and back to
allow a simple, secure attachment.
Computer Keyboard Pull Out Tray
Ideal for use as an accessory
for the display of desktop computers. The keyboard shelf mounts onto
Gondola/Wall shelving on Standard Upper Shelves. It provides a place
to store or display a keyboard. The keyboard tray measures 21” W by
Front Shelves offer an innovative way to highlight a new
product, a hot sale item or perhaps an entire line of
merchandise and may be used in Madix standard Gondola and Wall
fixtures, in line with SUS or STP Shelves, and a Standard Base
When used to shelve out both sides of an aisle a unique
scalloped effect is attained. This look is an attractive way to
display an array of merchandise.
This displayer exposes the
products at an angle for better visibility. The modified bracket
allows for shelf to be installed in a wide range of slots for
flexible placement. Standard wire fronts or shelf retainers may be
used. Load capacity is 600 lb.
The Transition Upper Shelf is
used with the Transition Base Shelf allowing different shelf sizes
in a single run. Pricing is based on the largest depth dimension in
the part number. Must be used with Transition Base Shelves and
The 1 1/4" tag molding is integrally
formed into the front edge of shelf surface. The shelf may be
displayed flat, 15 degree down-tilt or 30 degree down-tilt. Load
capacity of 200 Lbs.